Peróxido
Series 19 – Silicone for parts with low mechanical stress
Cost-effective compound for extrusion and moulding in low-stress applications
45 – 85 Shore A
Hardness
-60 °C / +200 °C
Temperature
Extrusion / Moulding
Processes
Series 19 is a silicone mixture specifically designed for the manufacturing of molded or extruded parts enduring low mechanical stress. It is a cost-effective option for applications where extreme tear or tensile properties are not required. Its original base colour is Cream, and it offers standard thermal stability from -60°C to +200°C.
Especificaciones técnicas
Designed to endure low mechanical stress
Moderate elongation at break (200% - 400%)
Standard tear resistance (12-16 KN/m)
Thermal resistance from -60 °C to +200 °C
Original colour: Cream
High density (1.37 - 1.44 g/cm³)
Versatility for extrusion and moulding
Technical Table
| Reference | Hardness (Shore A) | Tensile (MPa) | Elongation (%) | Tear (kN/m) | Density (g/cm³) |
|---|---|---|---|---|---|
| MQ & EQ1945 | 45 | 8 | 400 | 12 | 1.37 |
| MQ & EQ1955 | 55 | 7 | 250 | 13 | 1.39 |
| MQ & EQ1965 | 65 | 8 | 300 | 16 | 1.39 |
| MQ & EQ1975 | 75 | 7 | 230 | 13 | 1.44 |
| MQ & EQ1985 | 85 | 6 | 200 | 12 | 1.43 |
- EQ = Extrusion
- MQ = Moulding
- Values obtained according to ISO standards
Test Standards
- Dureza Shore A: NF ISO 7619-1
- Resistencia a tracción y alargamiento: NF ISO 37
- Resistencia al desgarro tipo C: NF ISO 34-1
- Densidad: NF ISO 2781
Tolerances
- Standard: ISO 3302
- Extrusion: E1
- Molding: M2
- Cut lengths: L2
Applications
Padding or wedging parts
Simple static gaskets
Basic protection profiles
Non-critical industrial applications
Manufacturable Products
Certifications
Consult technical department
- Material intended for parts with low mechanical stress.
- Original colour Cream (due to filler).
Request Series 19 technical assessment