Peróxido
Series 7 – Peroxide-cured silicone with high tear and abrasion resistance
High-toughness VMQ compound for inflatable seals, bellows, and wear applications
60 – 70 Shore A
Hardness
-60 °C / +230 °C
Temperature
Extrusion / Moulding
Processes
Series 7 is a peroxide-cured silicone mixture, designed to offer superior mechanical properties, specifically high tear strength and good abrasion resistance. It is processable by both extrusion and moulding. Thanks to its toughness, it is the material of choice for manufacturing inflatable seals, bellows, and profiles subjected to friction or severe stretching, operating in an extended thermal range from -60°C to +230°C.
Especificaciones técnicas
Very good tear resistance (up to 35 KN/m)
Good mechanical properties and tensile strength
Good abrasion resistance
Extended thermal resistance from -60 °C to +230 °C
Constant density of 1.19 g/cm³
Available in different colours according to RAL chart
Technical Table
| Reference | Hardness (Shore A) | Tensile (MPa) | Elongation (%) | Tear (kN/m) | Density (g/cm³) |
|---|---|---|---|---|---|
| EQ760 | 60 | 6.9 | 400 | 30 | 1.19 |
| MQ & EQ765 | 60 | 7 | 400 | 35 | 1.19 |
| MQ770 | 60 | 8 | 400 | 35 | 1.19 |
- EQ = Extrusion
- MQ = Moulding
- Values obtained according to ISO 3302 standards
Test Standards
- Dureza Shore A: NF ISO 7619-1
- Resistencia a tracción y alargamiento: NF ISO 37
- Resistencia al desgarro tipo C: NF ISO 34-1
- Densidad: NF ISO 2781
Tolerances
- Standard: ISO 3302
- Extrusion: E1
- Molding: M2
- Cut lengths: L2
Applications
Inflatable seals
Protective bellows
Industrial profiles
Technical moulded parts
Certifications
FDA 21 CFR §177.2600
RoHS compliant
REACH compliant
- The use of certain dyes and additives may potentially void certain certifications.
- Final validation of the material remains the responsibility of the customer according to the specific application.
Request Series 7 technical assessment