Platino
Series 15 – Platinum-cured cellular silicone (foam) for extrusion
Low density cellular compound for sealing profiles and insulation
N/A (Cellular material)
Hardness
-60 °C / +200 °C
Temperature
Extrusion
Processes
Series 15 is a platinum-cured cellular silicone (foam) formulation, specifically designed for the extrusion process. Its cellular structure allows for lightweight and flexible profiles, ideal for ensuring sealing on irregular surfaces. Being platinum-cured, it offers higher purity and better mechanical properties compared to standard peroxide foams.
Especificaciones técnicas
Good elastic recovery and sealing
Adequate tear resistance for cellular material (15 KN/m)
Excellent elongation (600%)
Thermal stability from -60 °C to +200 °C
Variable density between 0.5 and 0.8 g/cm³ depending on thickness
Homogeneous cellular structure
Colors available according to RAL chart
Technical Table
| Reference | Hardness (Shore A) | Tensile (MPa) | Elongation (%) | Tear (kN/m) | Density (g/cm³) |
|---|---|---|---|---|---|
| EQ1510 | N/A | 3 | 600 | 15 | 0.5 - 0.8 |
- EQ = Extrusion (Only available process)
- Values obtained according to ISO standards
Test Standards
- Dureza Shore A: N/A
- Resistencia a tracción y alargamiento: NF ISO 37
- Resistencia al desgarro tipo C: NF ISO 34-1
- Densidad: NF ISO 2781
Tolerances
- Standard: ISO 3302
- Extrusion: E1
- Cut lengths: L2
Applications
Sealing profiles (cords, squares, rectangles, trapezoids)
Insulation tubes
Confected gaskets for doors and enclosures
Applications requiring lightness and compressibility
Manufacturable Products
Certifications
FDA 21 CFR §177.2600
BfR IX and XV
Regulation EC 1935/2004
Arrêté du 25/11/92 (France)
- Density varies depending on the thickness of the extruded part.
- The use of certain dyes may potentially void certain certifications.
Request Series 15 technical assessment