Gasket vulcanising
End joining of extruded profile into a closed frame: the gasket arrives finished and ready to fit.
View gasket vulcanising →
In-house cutting, extrusion and vulcanising
Silicone gaskets
We manufacture silicone gaskets for static and dynamic sealing: die-cut or CNC-cut from sheet, O-rings, inflatable seals and vulcanised frames. The compound is chosen by application: temperature, contact medium and standards.
- ISO 9001Quality management
- FDA 21 CFR 177.2600Food grade
- ISO 10993 · USP VIMedical use
- EN 45545-2Railway sector
- ISO 8 cleanroom2,050 m²
Four families
Choose your gasket family
Product Flat silicone gaskets
Learn more →
Product Silicone O-rings
Learn more →
Product TIXAN'AIR® inflatable seals
Learn more →
Product Vulcanised silicone gaskets
Learn more →
Does your gasket start from a drawing or a sample? Tell us geometry, medium and temperature: the usual path starts with made-to-measure flat silicone gaskets.
Formats and fitting
Gasket formats we manufacture
Each format solves a different seal: static or active, in a groove or as a frame. These are the common ones; any variant is studied on drawing.
Certified material
Materials and compounds for every standard
The same gasket behaves differently depending on the compound: solid silicone from 30 to 80 Shore A, sponge or cellular when closing force is low, from −60 °C to +230 °C continuous.
We compound to requirement: FDA 21 CFR 177.2600 and EC 1935/2004 food grades, ISO 10993 and USP Class VI medical grades, and EN 45545-2 railway grades up to HL3. Every batch ships with its certificate.
Other elastomers
Silicone or FKM/Viton™?
Silicone wins on temperature range, ageing and certified food and medical grades. FKM/Viton™ wins when the medium is mineral oil, fuel or aggressive chemicals: there silicone swells and the fluoroelastomer holds.
If your medium points to the second group, we also manufacture made-to-measure FKM and Viton™ flat gaskets with the same CNC and die-cutting processes.
View FKM and Viton™ gaskets →
Full process
From material to finished gasket
Sheet and slab cutting
CNC and die cutting on our own sheet: agreed tolerances and series repeatability.
View sheet cutting →Silicone extrusion
The gasket profile is extruded on our own line with tunnel curing and continuous dimensional control.
View extrusion capability →Certified compounds
Solid, sponge and cellular VMQ series with food, medical and railway certification.
View silicone compounds →Need a silicone gasket for your application?
Send us a drawing or sample, contact medium, service temperature and required standards. We reply with feasibility, recommended compound and lead time.