Series 9 – Peroxide-cure silicone with excellent thermal resistance (300°C)
Series 9 is a peroxide-cured silicone compound formulated specifically to deliver excellent thermal stability. It is processable by extrusion and moulding. Its main feature is the ability to operate across a wide temperature range, withstanding from -60°C to +300°C in continuous service, with short peaks up to 315°C. It is the ideal material for oven equipment and industrial applications with high thermal demands.
Peroxide-cured silicone with excellent thermal resistance, suitable for continuous use up to +300 °C and short peaks of +315 °C. Offers strong mechanical properties and stability across a wide temperature range (-60 °C to +300 °C). Recommended for oven applications, profiles and moulded parts subjected to high temperatures.
Shore A hardness40 – 68
Temperature range-60 °C / 300 °C
Peak temperature315 °C
Density (g/cm³)1.11 – 1.20
Tensile strength (MPa)6.0 – 8.0
Elongation at break (%)300 – 400
Tear strength (kN/m)12.0 – 17.0
Curing systemPeroxide
Processing methodExtrusion and Moulding
Base colourNatural / Transparent
Available coloursRAL colours on request
Applications
- Profiles, industrial oven equipment, moulded parts and extreme thermal applications.
Certifications and technical standards
- FDA 21 CFR §177.2600
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
Series 20 – Peroxide silicone with high tear and high thermal resistance (270°C)
Series 20 is a peroxide-cured silicone compound that combines two critical properties: excellent tear strength and high thermal stability. It is processable by extrusion and moulding. This dual formulation makes it ideal for applications requiring both mechanical durability and high-temperature resistance (up to +270°C), such as inflatable gaskets in ovens or profiles under tension in hot environments.
Shore A hardness45 – 70
Temperature range-60 °C / 270 °C
Density (g/cm³)1.12 – 1.20
Tensile strength (MPa)7.0 – 8.0
Elongation at break (%)400 – 550
Tear strength (kN/m)30.0 – 36.0
Curing systemPeroxide
Processing methodExtrusion and Moulding
Base colourNatural / Transparent
Applications
- Inflatable gaskets, profiles, high-temperature moulded parts.
Certifications and technical standards
- FDA 21 CFR §177.2600
- RoHS compliant
- REACH compliant
Series 14 – Enhanced peroxide silicone for steam and fluid resistance
Series 14 is a peroxide-cured silicone compound formulated specifically to improve resistance to water steam, coolant fluids and oils. It is processable by extrusion and moulding. It delivers good compression set properties, making it ideal for autoclave gaskets and applications in hot, humid environments where other silicones may degrade faster.
Shore A hardness60 – 70
Temperature range-60 °C / 200 °C
Density (g/cm³)1.16 – 1.20
Tensile strength (MPa)8.0 – 8.0
Elongation at break (%)300 – 360
Tear strength (kN/m)15.0 – 18.0
Curing systemPeroxide
Processing methodExtrusion and Moulding
Base colourNatural / RAL colours
Available coloursRAL colours on request
Applications
- Autoclave gaskets, parts in contact with steam or coolants.
Certifications and technical standards
- FDA 21 CFR §177.2600
- BfR IX and XV
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
Series 2 – Peroxide-cure silicone for general and food-grade use
Series 2 is a peroxide-cured silicone compound designed for versatile processing by extrusion and moulding. It stands out for an exceptionally wide hardness range (10 to 90 Shore A) and the option of food-contact compliance depending on the formulation.
Peroxide-cured silicone compound. Provides excellent thermal stability and the option of food-contact or medical-grade use depending on the formulation.
Shore A hardness10 – 90
Temperature range-60 °C / 200 °C
Peak temperature315 °C
Density (g/cm³)1.07 – 1.23
Tensile strength (MPa)3.5 – 9.5
Elongation at break (%)125 – 950
Tear strength (kN/m)10.0 – 23.0
Curing systemPeroxide
Processing methodExtrusion and Moulding
Base colourNatural / Transparent
Available coloursRAL colours on request
Applications
- Tubes (Øint 0.5–145 mm), profiles (cords, square, rectangular), moulded parts and varied industrial applications.
Certifications and technical standards
- FDA 21 CFR 177.2600
- BfR IX and XV
- CE 1935/2004 (Food contact)
- ISO 10993 (medical grade depending on formulation)
- USP Class VI
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
Series 12 – Platinum-cure silicone with strong mechanical properties and versatility
Series 12 is a platinum-cured silicone compound processable by extrusion and moulding, recognised for its strong mechanical properties. It offers a very wide hardness range (10 to 90 Shore A) and food-contact compliance. A notable feature is that suction tubes manufactured with the EQ1260T grade are validated for integration into medical devices requiring CE marking.
Platinum-cured silicone with excellent mechanical properties and broad hardness availability. Processable by extrusion and moulding, compatible with food contact and medical applications (depending on formulation).
Shore A hardness20 – 90
Temperature range-60 °C / 200 °C
Peak temperature315 °C
Density (g/cm³)1.11 – 1.20
Tensile strength (MPa)6.0 – 9.0
Elongation at break (%)100 – 1000
Tear strength (kN/m)17.0 – 30.0
Curing systemPlatinum
Processing methodExtrusion and Moulding
Base colourNatural / Transparent
Available coloursRAL colours on request
Applications
- Tubes (Øint 0.5–145 mm), profiles (cords, square, rectangular), moulded parts and industrial or medical applications.
Certifications and technical standards
- FDA 21 CFR §177.2600
- BfR IX and XV
- CE 1935/2004
- ISO 10993 (depending on formulation)
- USP Class VI
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
Series 13 – Fluorosilicone (FVMQ) with high resistance to oils and solvents
Series 13 is a fluorosilicone blend (FVMQ base) catalysed with peroxide, designed specifically to provide exceptional resistance to mineral oils, fuels and organic solvents. It is processable by extrusion and moulding. Its main feature is its ability to retain its properties in environments where standard silicones (VMQ) would degrade or swell, making it ideal for applications in contact with aggressive fluids.
Fluorosilicone (FVMQ) catalysed with peroxide, processable by extrusion and moulding. It combines good mechanical properties with excellent resistance to oils, fuels and organic solvents. Designed for aggressive environments, with a thermal range from -60 °C to +170 °C (up to +220 °C with thermal additive).
Shore A hardness40 – 70
Temperature range-60 °C / 170 °C
Density (g/cm³)1.40 – 1.46
Tensile strength (MPa)6.0 – 7.0
Elongation at break (%)160 – 400
Tear strength (kN/m)10.0 – 21.0
Catalysis typePeroxide
Processing methodExtrusion and moulding
Base colourNatural / Transparent
Available coloursRAL colours on request
Applications
- Profiles, moulded parts and special components for environments with oils or solvents.
Certifications and technical standards
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
Series 7 – Peroxide silicone with high tear and abrasion resistance
Series 7 is a peroxide-cured silicone compound designed to deliver superior mechanical properties, specifically high tear strength and good abrasion resistance. It is processable by both extrusion and moulding. Thanks to its toughness, it is the material of choice for manufacturing inflatable gaskets, bellows and profiles subjected to friction or severe stretching, operating across an extended thermal range from -60°C to +230°C.
Peroxide-cured silicone with very high tear strength and good abrasion resistance. Offers excellent mechanical and thermal properties (-60 °C to +230 °C), suitable for inflatable gaskets, bellows, profiles and moulded parts subjected to mechanical stress.
Shore A hardness60 – 70
Temperature range-60 °C / 230 °C
Density (g/cm³)1.19
Tensile strength (MPa)6.9 – 8.0
Elongation at break (%)400 – 400
Tear strength (kN/m)30.0 – 35.0
Curing systemPeroxide
Processing methodExtrusion and Moulding
Base colourNatural / Transparent
Available coloursRAL colours on request
Applications
- Inflatable gaskets, profiles, moulded parts and industrial bellows.
Certifications and technical standards
- FDA 21 CFR §177.2600
- RoHS compliant
- REACH compliant
- NF ISO 7619-1
- NF ISO 37
- NF ISO 34-1
- NF ISO 2781
- ISO 3302 (M2/E1/L2)
