Silicone extrusion
Our own extrusion line with tunnel curing: from drawing to series with continuous dimensional control.
View extrusion capability →
In-house extrusion · European manufacturer
Silicone profiles
We extrude technical silicone profiles in solid, hollow and cellular geometries, with the compound defined by the application: sealing, leak-tightness, thermal insulation and edge protection. From drawing to series, with batch-to-batch traceability.
- ISO 9001Quality management
- EN 45545-2Railway sector
- FDA 21 CFR 177.2600Food grade
- ISO 10993 · USP VIMedical use
- ISO 8 cleanroomFrance · Italy
Three families
Choose your profile family
Product Custom silicone profiles
Learn more →
Product Silicone foam profiles
Learn more →
Product Square and rectangular profiles
Learn more →
None of them fits? Most of our profiles start from a customer drawing: that path is the custom silicone profiles page.
Section catalogue
Geometries and cross-sections we extrude
Each geometry solves a different sealing or assembly function. These are the most common section families; any intermediate variant is extruded with our own tooling.
Certified material
Materials and compounds for every standard
The same profile behaves differently depending on the compound: solid silicone from 30 to 80 Shore A for structural sealing, or cellular silicone when closing force is low and clearance must be absorbed. Service range from −60 °C to +230 °C continuous.
We compound to requirement, not from a catalogue: FDA 21 CFR 177.2600 and EC 1935/2004 food grades, ISO 10993 and USP Class VI medical grades extruded in an ISO 8 cleanroom, and EN 45545-2 railway grades up to HL3. Every batch ships with its certificate.
Round cross-section
Profile or silicone cord?
When the section you need is round, the product is the cord: the same extrusion and the same compounds, in diameters from 1 to 50 mm.
Other elastomers
Silicone or EPDM rubber?
Silicone wins on temperature range (−60 °C to +230 °C), weathering stability and certified food and medical grades. EPDM and the other industrial rubbers win on abrasion and tear resistance, and on cost where there is no thermal or sanitary requirement.
If your application points to the second group, we also manufacture custom extruded EPDM rubber profiles, alongside neoprene, NBR and Viton™ depending on the contact medium.
View EPDM rubber profiles →
Full process
In-house extrusion and finishing
Certified compounds
Solid and cellular VMQ series with food, medical and railway certification, documented batch to batch.
View silicone compounds →Cut-to-length
Made-to-measure cut pieces ready to fit, with agreed tolerances and bagging per reference.
View cut-to-length service →Gasket vulcanising
End joining into a closed frame: the extruded profile is delivered as a finished gasket.
View gasket vulcanising →Need a silicone profile for your application?
Send us the section (drawing or sketch), target Shore A hardness, estimated metres and required standards. We reply with feasibility, recommended compound and tooling lead time.