Drawing review
We analyse geometry, material, tolerances and standards, and come back with feasibility, recommended technology and tooling lead time.
Send a drawing or enquiry →
In-house tooling · Repeatable series
Moulded silicone parts
We manufacture custom silicone parts starting from your drawing: we design the tooling, validate samples and run the series with batch-to-batch traceability. Four moulding technologies and two ISO 8 cleanrooms to always pick the right route.
- ISO 9001Quality management
- ISO 13485Medical devices
- ISO 8 cleanroomFrance · Italy
- ISO 10993 · USP VIMedical use
- FDA 21 CFR 177.2600Food grade
Four technologies
Choose the technology for your part
Product Silicone parts by LSR injection
Learn more →
Product Silicone parts by HCR injection
Learn more →
Product Compression moulded parts
Learn more →
Product 2K silicone overmoulding
Learn more →
Not sure which technology your part needs? You don't have to be: send us the drawing or a sample and we propose the route with its technical rationale.
From drawing to series
Your mould project, step by step
A moulded part starts with well-resolved tooling. We design and build it ourselves, and from then on every reorder comes out of the same mould with the same result.
Tooling design and build
Mould designed and built by our own team, optimised for silicone and the planned series.
View tooling design →Samples and validation
First-off parts with dimensional report and, where the application demands it, production in an ISO 8 cleanroom.
View ISO 8 cleanrooms →Series and reorders
With the mould validated, every order repeats material, process and control. Your part, always the same.
View LSR and HCR moulding →
Typical cases
Parts that come out of our moulds
Custom components for fluids, sealing, damping and material joining. Each one started from a drawing like yours.
Certified material
LSR or HCR: the material to suit the part
Liquid silicone (LSR) injects precisely into fine geometries and high volumes; solid silicone (HCR) gives body to robust parts from 30 to 80 Shore A. Service range from −60 °C to +230 °C continuous.
We compound to requirement: ISO 10993 and USP Class VI medical grades moulded in an ISO 8 cleanroom, FDA and EC 1935/2004 food grades, and EN 45545-2 railway grades. Every batch ships with its certificate.
Other elastomers
Silicone or another rubber?
Silicone rules on temperature range, ageing and certified medical and food grades. When the part calls for oil resistance, abrasion resistance or tighter cost without thermal demands, the route is EPDM, NBR or CR.
For that second group we also manufacture moulded rubber parts under the same project scheme: review, in-house mould and series.
View moulded rubber parts →
Got a part to mould?
Send us a 2D/3D drawing or a physical sample, target material, yearly quantities and required standards. We reply with feasibility, recommended technology and tooling and sample lead times.